Send Your Inquiry

Tell us about your application and the tools you need.

* Required fields

Skip to content
Small cutting tool above a machined metal workpiece

Micro End Mills

Micro end mills machine small slots, contours and detailed features. MSU offers square-end, ball-nose and corner-radius micro carbide tools in NNC, NNH, NNCH and NNX series.

Start with the smallest feature and its required end profile. Then check cutting diameter, neck clearance and working reach against the part drawing.

Send a model code and quantity, or a drawing showing the smallest feature and machining depth.

Find a Micro End Mill

Match the End Profile to the Feature

Choose the cutting profile first, then the diameter and length needed to reach the feature.

For larger features, compare Square End Mills, Ball Nose End Mills and Corner Radius End Mills. Check the dimensions against the same part requirements.

Three micro end mills with fine cutting tips

Square End

Slots

Check the cutting diameter, corner requirement and depth.

Ball Nose

Contours

Match the ball radius and reach to the smallest detail.

Corner Radius

Corners

Match both the cutting diameter and corner radius.

Neck and Reach

Access

Check neck diameter, neck length and usable projection together.

Check how cutting diameter, neck and reach affect access to the feature.

Compare Micro Tool Dimensions

Check Diameter, Neck and Reach

Cutting diameter, neck and reach describe different parts of the tool. Check each against the feature and surrounding walls.

Micro end mill geometry, clearance and material selection factors.
Selection factor Check on the drawing Why it matters
End profile Square end, ball nose or corner radius Matches the required floor, contour or corner
Cutting diameter Smallest slot or feature and its tolerance Determines whether the cutting edge can enter the feature
Neck Neck diameter and length Provides clearance behind the cutting portion
Working reach Distance to the feature after clamping Checks access without body or holder interference
Workpiece Material grade and hardness Supports selection of the tool series and cutting conditions
Coating Selected model and material requirement Must suit the workpiece and operation

Cutting length describes the available cutting edge. Neck length and reach describe access beyond it. A longer tool does not automatically provide more usable cutting length.

Check the clamping and machine conditions before selecting the final size.

Check Your Micro Milling Setup

Match Clamping to the Feature

After selecting the cutting geometry, check the holder, runout measurement and workpiece support.

  • Holder

    Match the shank and check the clamping condition.

  • Runout

    State the measuring position and tool projection when comparing a measured value.

  • Workholding

    Check support and holder access around the part.

  • Cutting conditions

    Identify the operation, engagement and coolant or air supply.

MSU carbide cutting tools

Email the feature drawing with any clamping or access constraint.

Discuss a Micro Milling Application

Find Your Micro Tool Family

Use these family references to locate the model drawing. A family code alone does not identify an orderable size.

MSU micro end mill series and family references.
Series Family references
NNC NNC-2TS, NNC-2TSP, NNC-4TSP, NNC-6T, NNC-2BS, NNC-2BSP, NNC-2B, NNC-4RSP, NNC-2R
NNH NNH-2TS, NNH-2TSP, NNH-4TSP, NNH-2BS, NNH-2BSP, NNH-2B, NNH-2RSP, NNH-4RSP, NNH-4R
NNCH NNCH-4R
NNX NNX-2TS, NNX-2TSP, NNX-4TSP, NNX-4T, NNX-2BS, NNX-2BSP, NNX-2B, NNX-2RS, NNX-2RSP, NNX-4RSP
Micro end mill range with assorted cutting diameters

From family to model

Downloads contains the model drawings. Use the required diameter and end profile to locate a size, then check its cutting length, neck and reach against the feature.

Check the full dimensions for the size you need.

View Micro End Mill Dimensions

Micro Tool Dimensions and Inspection

A micro-tool drawing should distinguish cutting dimensions from clearance dimensions.

The MSU Factory has Walter HELITRONIC MICRO equipment; Quality Control facilities include a ZOLLER G3 measurement system.

Cutting diameter and end profile define the cutting feature. Neck diameter and length define clearance behind it. Identify which dimensions require a tolerance or inspection record.

Operator using the control panel of a CNC tool grinder

State any required measurement records before ordering.

View Quality Control

Request a Quote

For a repeat order, send the full model and quantity. For help choosing, email the part detail or current setup to Maria.

MSU carbide cutting tools

MOQ

Normally 5–10 pieces; your quotation confirms the quantity for the selected product.

Samples

Samples are charged. Sample freight is paid by the customer.

Lead time

Your quotation confirms production timing. Shipping time is stated separately.

Contact

Maria: maria@msutools.com · +86 13973369578 (phone or WhatsApp). Email drawings and photos.

Share your feature drawing so we can check the tool profile and usable reach.

Request a Quote

Micro End Mill Questions

No. Micro end mills are milling tools; micro drills are holemaking tools. Select the tool for the operation as well as the feature size.

No. The end profile, cutting length, neck clearance and mounted reach must also fit the feature and surrounding walls.

No. Neck length provides clearance behind the cutting portion. Cutting length specifies the available cutting edge; the two dimensions serve different purposes.

A family code narrows the product group. The diameter, end profile and required reach are still needed to identify a size from its drawing.

Yes. A custom request starts with the required diameter, profile, neck, reach and tolerances. Material and machining conditions determine the proposed tool requirements.