Send Your Inquiry

Tell us about your application and the tools you need.

* Required fields

Skip to content
Collet chuck components and spindle connections

Collet Chucks

Collet chucks hold rotating cutting tools by their shanks. MSU offers chuck assemblies, ER, DC and SK collets, and matching nuts, spanners and retention knobs.

Choose the machine interface first, then match the chuck, collet and nut to the actual tool-shank diameter. Check the projection and space around the workpiece before completing the assembly.

Send your chuck code and tool-shank diameter, or describe the assembly you need.

Find a Collet Chuck

Match the Chuck, Collet and Nut

Use the collet system and size to narrow the options, then check the clamping range and mating components.

Chuck connections include BT/DC, HSK(A) ER and C/ER straight-shank options. Match the machine connection separately from the collet system.

Collets arranged by diameter
Compare the complete assemblySystem names alone do not establish fit.

Collet chuck assemblies

Component
Chuck body and machine connection.
Fit
Spindle interface, collet system and projection.
Assembly detail
Which collets, nuts and retention components are supplied.

ER collets and chucks

Component
ER chuck, collet and nut.
Fit
ER size, actual shank diameter and specified clamping range.
Assembly detail
The nut and collet series, including any sealing requirement.

DC collets and chucks

Component
DC chuck and collet.
Fit
System size, clamping range and projection.
Assembly detail
The matching chuck and collet dimensions.

SK collets

Component
SK collet for the selected chuck.
Fit
Collet dimensions and tool-shank range.
Assembly detail
The specified mating chuck.

Nuts, spanners and retention knobs

Component
Parts needed to assemble or replace components.
Fit
Thread, mating dimensions and spanner fit.
Assembly detail
Each item included in the quotation.

Match the tool-shank diameter

The collet range must include the actual shank diameter. For an ER assembly, also match the nut and collet series. Use the assembly instructions and tightening torque specified for the selected components.

Check working reach and the space available for assembly and tool changes.

Check Your Setup

Check Reach and Operating Conditions

A correctly matched collet still needs enough clearance at the workpiece and a suitable setup for the machining task.

Collets in a range of sizes arranged in three rows

Reach and clearance

Projection
Use the reach needed for the feature; avoid unnecessary extension.
Clearance
Check the chuck body and nut against the workpiece and fixture.

Coolant and assembly

Coolant
Confirm the required coolant route and any sealing components.
Assembly
Use the nut, spanner and tightening instructions for the selected system.

Speed and runout

Spindle speed
Check the intended speed against the selected assembly requirements.
Measurement
Runout limits need the test conditions listed in the inspection section below.

Access for tool changes

Check that the nut and spanner are accessible during tool changes, including when the holder is near a fixture.

Share a setup drawing if reach, clearance or runout is critical.

Discuss a Collet Chuck Setup

Identify the Chuck and Its Components

For a replacement part, use the markings on the chuck, collet and nut. A chuck code identifies the body; it does not necessarily identify every separate clamping component.

BT/DC and HSK(A) ER identify different machine and collet connections. C/ER uses a straight-shank connection. Retention knobs, nuts and spanners must match the selected assembly.

Find dimensional drawings and component references in Downloads.

Use the full model reference to find the corresponding drawing and components.

Find Drawings and Components

Dimensions and Inspection Requirements

A runout requirement applies to an identified chuck, collet and test setup.

Collet assortment on a brushed metal background

State the chuck and collet references, test bar, projection and measuring position. This makes the requested runout value comparable to the proposed measurement.

Use the tightening instructions for the selected nut and collet system. Request any measurement records before ordering so their scope is included in the quotation.

Need inspection records? Include the measured features and test conditions in your enquiry.

View Quality Control

Request a Quote

For a repeat order, send the full model and quantity. For help choosing, email the part detail or current setup to Maria. Ordering and Delivery covers purchasing terms; Downloads has product drawings.

MSU operator at a ZOLLER tool measurement station

MOQ

Normally 5–10 pieces; your quotation confirms the quantity for the selected product.

Samples

Samples are charged. Sample freight is paid by the customer.

Lead time

Your quotation confirms production timing. Shipping time is stated separately.

Contact

Maria: maria@msutools.com · +86 13973369578 (phone or WhatsApp). Email drawings and photos.

Your quotation sets the payment, delivery and packaging terms for the order.

View Ordering Information

Collet Chuck Questions

Use the cutting tool’s shank diameter, which may differ from its cutting diameter. The shank must fall within the specified clamping range of the selected collet.

No. Also match the clamping range, nut and collet series, and any sealing requirement. Use the complete references when replacing individual components.

The collets and chucks shown here hold cutting-tool shanks. A workholding collet requires a separate machine and workpiece specification.

The quotation lists the included items. Identify any collets, nut, spanner or retention knob that must be supplied with it.