Send Your Inquiry

Tell us about your application and the tools you need.

* Required fields

Skip to content
Cutting tool and chips in a machining enclosure

Ceramic End Mills

Choose TB straight-shank or SJ reduced-neck solid ceramic end mills, with 4- and 6-flute options and cutting diameters from 4 to 20 mm. Match diameter, corner radius and cutting length to the feature.

Use a reduced neck where additional clearance is needed behind the cutting edges. Select the grade and cutting conditions for the actual workpiece, engagement and machine setup.

Send the required feature depth, material and tool reference, or email a part drawing.

Find a Ceramic End Mill

Choose the Clearance Behind the Cutting Edge

TB has a straight-shank configuration. SJ adds a reduced neck and a specified useful length. Choose around the wall or recess to reach, while keeping projection as short as the feature permits.

Solid ceramic construction 4 and 6 flutes 4–20 mm cutting diameters CW10 and CS35 grade options

CS35 is the main recommended grade for these tools. CW10 is an optional grade made to order. Select the grade for the specific tool and application.

Compare the clearance needed behind the cutting edges.

Compare TB and SJ

Compare TB and SJ with the Part Geometry

Cutting length determines how much cutting edge is available. Useful length and neck clearance determine whether the body can pass the surrounding wall.

Tool dimensions

Cutting length and useful reach serve different purposes

TBStraight shank
SJReduced neck
TB straight-shank and SJ reduced-neck ceramic end mill comparison.
Selection factor Straight-shank TB Reduced-neck SJ
Body configuration Straight shank Reduced neck behind the cutting edges
Flute count 4 or 6 flutes 4 or 6 flutes
Cutting diameter 4 to 20 mm 4 to 20 mm
Corner radius Select for the part corner and tool size Select for the part corner and tool size
Cutting length Available cutting edge for axial engagement Available cutting edge; separate from useful length
Clearance and length Check shank, overall length and holder projection Also check neck diameter and useful length
Grade options CS35 recommended; CW10 optional, made to order CS35 recommended; CW10 optional, made to order
Setup Check holder fit, runout and engagement Also check neck and holder clearance through the cut
Ceramic cutting tool catalog cover
Check the complete tool dimensions against the part and holder.

Keep these dimensions with the tool code

The useful length includes clearance behind the cutting edge; it is not additional flute length. Check the mounted tool and holder against the part section.

  • Cutting diameter
  • Corner radius
  • Cutting-edge length
  • Shank diameter
  • Overall length
  • Reduced-neck diameter when applicable
  • Useful or reach length when applicable

Check cutting length and useful reach against the part and holder.

Check the Milling Setup

Plan Engagement and Tool Projection

Define the entry, axial depth and radial engagement before selecting the tool and grade. Include the holder envelope when the wall or recess restricts access.

  • Part and materialShow the feature, alloy grade, hardness and surface condition.
  • Entry and engagementDescribe entry method, axial depth and radial width of cut.
  • Tool geometrySpecify diameter, radius, cutting length, flute count and selected grade.
  • Reach and clearanceInclude wall height, neck diameter, useful length and holder outline.
  • Mounted setupRecord clamping length, projection, runout and machine conditions.
  • Current resultInclude cutting data, coolant method and where wear, chatter or edge damage appears.
Rotating tool machining a metal workpiece with sparks visible

Grade and cutting conditions

CS35 is SiAlON; CW10 is whisker ceramic. Match the selected grade to the material and engagement before establishing cutting conditions.

Part and holder clearance

Check the complete mounted tool through the programmed path. Include the holder body and clamping length in the clearance assessment.

Use the shortest suitable projection

Choose enough working reach to clear the feature. Additional projection changes the supported tool length and the setup to assess.

Email the part section and planned engagement to discuss tool reach.

Discuss a Ceramic End Mill

Compare Two 6 mm Tools and Their Working Lengths

Both examples have a 6 mm cutting diameter, 0.75 mm corner radius, 4.5 mm cutting length and 4 flutes. The SJ example adds a 5.8 mm reduced neck and 9 mm useful length.

Labeled ceramic end mill assortment

Straight-Shank Ceramic End Mills

TB-D6R0.75C6S4.5L50F4 · dimensions in mm

TB
Configuration
TB straight shank
Flutes F
4
Cutting diameter C
6 mm
Corner radius R
0.75 mm
Cutting length S
4.5 mm
Shank D / overall L
6 mm / 50 mm
Grade
CS35 recommended; CW10 optional, made to order

Reduced-Neck Ceramic End Mills

SJ-D6R0.75C6S4.5L50F4 · dimensions in mm

SJ
Configuration
SJ reduced neck
Flutes F
4
Cutting diameter C
6 mm
Corner radius R
0.75 mm
Cutting length S
4.5 mm
Neck D1 / useful L1
5.8 mm / 9 mm
Shank D / overall L
6 mm / 50 mm
Grade
CS35 recommended; CW10 optional, made to order

Read the ceramic end-mill drawing

  • C: cutting diameter
  • D: shank diameter
  • R: corner radius
  • S: cutting length
  • L: overall length
  • SJ also has D1 neck diameter and L1 useful length

Find the full size drawings in Downloads. The two 6 mm examples have the same cutting length; the SJ neck adds clearance, not a longer cutting edge.

Use the dimension drawing to distinguish cutting length, neck and useful reach.

View Ceramic End Mill Dimensions

Check Tool Dimensions and the Milled Feature

Specify cutting diameter, radius, cutting length and mounting dimensions to inspect. Use the component drawing for finished-feature and surface acceptance.

MSU operator at a ZOLLER tool measurement station

Tool dimensions

Specify cutting diameter, radius, cutting length and shank. For SJ tools, also identify the neck diameter and useful length on the inspection requirement.

Cutting edge

State the edge preparation, radius or cutting-edge features to be measured.

Part acceptance

Use the component drawing to define the finished dimensions and surface requirements for the trial.

  • Dimensional measurements
  • Edge inspection where specified
  • Tool and grade identification
  • Agreed packaging and labels

Request any required reports before ordering so the measured features and document scope can be agreed.

Keep the tool reference and cutting conditions with the finished-part measurements.

Identify critical tool measurements and required inspection records.

View Inspection Information

Order a Replacement or Discuss a Drawing

For a repeat order, send the complete tool reference and quantity. For a new job, email the drawing and describe the feature or machining problem. Ordering and Delivery covers MOQ, payment and shipping. Tool drawings are available in Downloads.

MSU operator at a ZOLLER tool measurement station

Repeat order or new job

Send the complete TB or SJ code, grade and quantity, or email the part section with material, holder and planned engagement.

MOQ and samples

MOQ is normally 5–10 pieces, confirmed for the selected product. Samples and sample freight are charged.

Delivery and payment

Availability, production and shipping timing are confirmed in the quotation. T/T deposit and balance terms are stated with the order.

Shipping and packaging

Include the destination and required packaging. Delivery terms are agreed for the order.

After-sales support

If a tool or dimension is in question, retain the order reference, measurements and photos so the issue can be investigated.

Contact

Email Maria at maria@msutools.com or call/WhatsApp +86 13973369578. Send drawings and photos by email.

Confirm the full code, grade and quantity with delivery requirements.

View Ordering and Delivery

Ceramic End Mills Questions

TB has a straight-shank configuration. SJ adds a reduced neck and useful-length dimension for clearance behind the cutting edges. Check the mounted holder and tool against the part.

Not necessarily. The 6 mm TB and SJ examples both have 4.5 mm cutting length. SJ adds a 5.8 mm neck and 9 mm useful length; useful length is separate from flute length.

CS35 is the main recommended grade; CW10 is an optional grade made to order. Match the grade to the specific tool, material and cutting conditions.

Cutting diameters span 4 to 20 mm, with 4- and 6-flute configurations. Keep diameter, radius, cutting length and overall dimensions together in the full code.

Establish conditions for the selected ceramic grade and engagement. Provide the current tool, material, speed, feed, cutting depths and coolant method as the starting information.

Email the part and tool drawings with cutting diameter, radius, cutting length, neck, useful reach, shank and holder envelope. Include the material and machining task.