Drilling heads
QD, FD, CD, GD and LD families offer different head designs. Select the complete head code for the intended body.

Choose a replaceable drill head for an existing body, or specify a complete drilling assembly. MSU offers Mono Tip heads and matching bodies, plus Multi Tip designs with a center head and side inserts.
Start with the components you already have and the hole you need. Match the head, body and connection before checking assembled reach and coolant supply.
Tell us whether you need a replacement head, drill body or complete assembly.
Find a Replaceable-Head DrillMono Tip pairs a drilling head with a compatible body. Multi Tip assemblies use a center drilling head and side inserts, with solid-body and modular-body options.
Replaceable head and matching body
QD, FD, CD, GD and LD families offer different head designs. Select the complete head code for the intended body.
The body determines the compatible head sizes, working length and machine-side connection.
Center head and side inserts
A solid body carries the specified center head and side inserts. Check all cutting components when replacing a set.
The cutting unit joins a separate holder unit. Match the joint code as well as the center head and side inserts.
Side inserts must match the designated position and seat in the selected assembly.
For stepped holes, define each diameter and its axial position on the part drawing.
For one-piece tools, compare Solid Carbide Drills or Solid Carbide Deep Hole Drills. For small holes, compare Micro Drills. For a separate finishing cut, compare Solid Carbide Reamers.
Identify which parts belong to the assembly before choosing a replacement.
Compare Assembly ComponentsThe same nominal cutting diameter does not establish compatibility. Check the complete codes and mating features of the parts that connect.
| Component | Its role | Match it with | Ordering detail |
|---|---|---|---|
| Mono Tip head | Provides the cutting end | Head family, size and compatible body | Complete head code and quantity |
| Mono Tip body | Holds the selected head | Head size range, connection and working length | Body code and coolant arrangement |
| Multi Tip solid body | Carries center head and side inserts | Exact head and insert references | List the cutting parts required with the body |
| Multi Tip modular body | Connects cutting and holder units | Joint code and all cutting components | Identify both units and included hardware |
| Multi Tip side insert | Cuts at its designated position | Insert code and matching seat | State the assembly and insert position |
| Special step-drill body | Positions cutting edges at several steps | Part drawing and component arrangement | Agree step diameters and axial lengths |
The connection between the head and drill body is separate from the connection between the body and machine holder. Both must fit, and the assembled coolant path must remain usable.
Use the installation, locking and torque instructions for the exact assembly. Identify the required screws, keys or other hardware before ordering spare parts.
Check component fit together with the hole depth and mounted reach.
Check the Complete AssemblyOnce the components match, check the assembled tool against the part section and available machine space.
Email the complete codes, photos of the markings and a photo of the assembled tool. Identify the part to be replaced; a partial marking or similar appearance can leave the connection unresolved.
For special step diameters and lengths, email the part drawing to discuss Custom Cutting Tools.
Identify the part you need and the assembly it will fit.
Ask About a ReplacementA head, drill body and complete assembly are different order items. The quotation should identify each supplied component and its quantity.
Head-only order: state the full family, diameter and head-type code.
Body-only order: identify the compatible head and whether locking hardware is included.
Complete set: list the body, center head, side inserts and required hardware.
Modular set: list the cutting unit, holder unit, joint and cutting components.
Spare inserts: state the exact code, position and quantity needed.
Special assembly: identify the approved drawing and the components included.
Mono Tip head designations include S1, S2, RA, RB, RD, F, C and ST, with availability depending on the family. Keep the suffix when identifying a replacement.
Find the full dimension drawings in Downloads.
Use the full tool reference and dimension drawing when ordering.
View Tool DimensionsCheck the supplied component list and mating references before assembly. Agree which component dimensions and assembled measurements are required.
See MSU Factory and Quality Control for equipment and tool-measurement information.
Record assembled runout at the agreed measurement location. If a replacement changes the result, keep the old and new component references with the inspection readings.
Specify the tool measurements and records required before placing the order.
View Tool Inspection Information
The quotation will identify the selected tools or components, quantity, delivery terms and any agreed inspection records.
Use the full tool or component reference and quantity, or the previous order number. Mention any change to the application.
Email the hole drawing and material. Highlight the depth, tolerance, clearance or machining problem that needs attention.
MOQ is normally 5–10 pieces, confirmed for the selected product. Samples and sample freight are charged.
Production and shipping timing are confirmed in the quotation. T/T deposit and balance terms are stated with the order.
See Ordering and Delivery for purchasing terms and Downloads for dimension drawings.
Email Maria at maria@msutools.com or call/WhatsApp +86 13973369578.
Check the purchasing terms when confirming your tool reference, quantity and delivery.
View Ordering and DeliveryMono Tip uses a replaceable drilling head with a matching body. Multi Tip assemblies combine a center drilling head with side inserts, and include solid-body and modular-body options.
Diameter alone is insufficient. Match the complete head reference to the body’s specified head family, size range and connection.
State the exact component and quantity you need. Separate supply and availability are confirmed in the quotation, including any required locking parts.
It identifies the head design within the family. Designations include S1, S2, RA, RB, RD, F, C and ST; the available combinations differ by family.
Ask for an itemized component list. For Multi Tip, this should identify the body or units, center head, side inserts and hardware included in the quote.
Request the instructions for the exact head and body combination. A value for a different connection should not be transferred to this assembly.
Yes. Email the part drawing with step diameters, axial lengths, material and machine connection. The proposed assembly and supplied components can then be defined.