NNC-4RF
Corner-radius roughing
NNC-4RF has a corner-radius profile and a stated hardness limit of 45 HRC. Match the diameter and radius to the stock-removal task.

Roughing end mills remove stock before the finishing passes. MSU offers NNC-4RF, NNH-4RF and 4HROU solid carbide roughing cutters for different tool geometries and workpiece conditions.
Choose around the material and hardness, the amount of stock to remove and the access to the feature. Then match cutting diameter, corner geometry and usable reach.
Send a model and quantity, or describe the material and roughing task.
Find a Roughing End MillCompare the tool geometry and hardness condition before selecting the size.
Corner-radius roughing
NNC-4RF has a corner-radius profile and a stated hardness limit of 45 HRC. Match the diameter and radius to the stock-removal task.
Corner-radius roughing
NNH-4RF has a corner-radius profile and a stated hardness limit of 58 HRC. Check the actual material grade and the required working length.
Serrated cutting edges
4HROU uses a serrated roughing profile. Select its diameter and cutting length around the feature and the planned engagement.
Compare the cutting and overall lengths for a replacement roughing tool.
Compare Tool DimensionsSelected 4HROU dimensions in millimeters. These examples show how cutting length and shank size vary between models.
| Model | Cutting diameter d1 | Cutting length L1 | Shank Dh6 | Overall length L |
|---|---|---|---|---|
| 4HROU04450 | 4 | 10 | 4 | 50 |
| 4HROU04475 | 4 | 15 | 4 | 75 |
| 4HROU06550 | 5 | 13 | 6 | 50 |
| 4HROU06675 | 6 | 20 | 6 | 75 |
| 4HROU1010100 | 10 | 40 | 10 | 100 |
For NNC-4RF and NNH-4RF replacements, include diameter, corner radius and length with the model reference. A short diameter code can correspond to more than one length.
Use the full drawing to check a size beyond these examples.
View Roughing Tool DimensionsStart with the material to remove and the space available for the cutter. The End Mill Selection Guide explains how geometry, workpiece and setup affect selection.
Identify the starting stock and the material to leave for finishing.
Distinguish full-width slotting from side milling or pocketing, and check chip removal.
Match the diameter, corner profile and cutting length to the feature.
Check holder clearance, usable reach, spindle capability and workholding.
Steel and Pre-Hardened Steel Milling
Check the actual material grade and hardness.
Check the tool condition against the actual hardness before selecting cutting data.
Discuss a drawing when the required diameter, corner profile or reach differs from the available sizes.
Email a part sketch if pocket access or stock allowance determines the tool choice.
Discuss Your Roughing TaskMatch the replacement tool to the dimensions that affect the roughing pass.
The MSU Factory has Walter HELITRONIC MICRO equipment; Quality Control facilities include a ZOLLER G3 measurement system.
For a corner-radius tool, specify both diameter and corner radius. For a serrated tool, retain the required cutting profile. A longer overall tool can still have a shorter cutting section.
Need a measurement report? State the tool dimensions to be reported with your enquiry.
Discuss Inspection RequirementsFor a repeat order, send the full model and quantity. For selection help, email the part detail and material to Maria.
Normally 5–10 pieces; the quotation confirms the quantity for your selected tools.
Samples are charged. Sample freight is paid by the customer.
Your quotation confirms production timing. Shipping time is stated separately.
Maria: maria@msutools.com · +86 13973369578 (phone or WhatsApp). Email drawings and photos.
Downloads has the full product drawings. See Ordering and Delivery for purchasing terms.
Ask us to confirm a replacement model or help size a tool for your roughing operation.
No. The workpiece grade, cutting geometry and engagement still determine suitability. The hardness limits distinguish the stated conditions of NNC-4RF and NNH-4RF; they do not establish a common speed or feed.
That depends on the specified tolerance and finish. Plan the finishing allowance and finishing pass separately from stock removal.
Yes. For example, 4HROU04450 and 4HROU04475 both have a 4 mm cutting diameter, but their cutting lengths are 10 and 15 mm and their overall lengths are 50 and 75 mm.
No. Part of the shank is clamped, and the holder must clear the workpiece and fixture. Check the mounted tool at the deepest cut.